Quick answer: Load your full set of shots in Hugin, set the correct fisheye lens type, align with CPFind, then in the Fast Preview choose the Equirectangular projection and a 2:1 canvas (for example 6000×3000 or larger). Level the horizon, check the zenith and nadir, and render a TIFF or JPG. Those steps turn a ring of fisheye frames into a proper 360×180 panorama that any 360 viewer can display.
What makes 360 stitching different
An ordinary panorama covers part of the view; a 360 panorama must wrap the entire sphere — 360 degrees around and 180 degrees from zenith (straight up) to nadir (straight down) — with the left edge joining the right edge seamlessly. The container for that sphere is the equirectangular image: twice as wide as it is tall, with the horizon on the middle row. Because the wrap-around seam and the poles are where problems hide, 360 stitching rewards a disciplined set of source photos. If you are new to Hugin itself, work through our step-by-step Hugin tutorial first; this guide focuses on the 360-specific decisions.
Shoot (or prepare) a complete sphere
Most 360 sets are shot with a fisheye lens on a panoramic head, rotating around the lens entrance pupil in a ring of shots, plus a zenith shot pointing up and one or two nadir shots pointing down. The overlap rule from general panorama work — roughly 25–50% between frames — applies with extra force at the poles, where equirectangular mapping stretches every pixel. Gaps at the zenith or nadir cannot be invented by the stitcher; they show up as holes or smeared stars in the render. Our shooting guide covers ring sizes and settings per lens. Sort the set before loading: all ring, zenith and nadir frames belong in one project.
Load the set and set the lens type
Add all images in the Assistant. The critical 360-specific step is the lens type: a fisheye must be declared as what it is — Circular fisheye for a lens that projects a full circle, Full frame fisheye for one that fills the frame diagonally. If Hugin guesses a rectilinear (Normal) lens from the EXIF, CPFind may still find points, but the optimizer will fight the geometry and the sphere will not close cleanly. For a dual-fisheye 360 camera export, each frame is a circular fisheye and the pair is shot back-to-back; treat the two circles as two fisheye photos with a very wide field of view. Once the lens type is right, click Align. CPFind’s current multirow default handles rings well; for a single ring plus zenith/nadir, check afterwards that the up and down shots actually received control points — their overlap areas are small and highly distorted.
Set the equirectangular output
In the Fast Preview window, set the projection to Equirectangular and confirm the field of view covers the full sphere: 360 degrees horizontal, 180 vertical. Then, in the Stitcher tab, set the canvas to a strict 2:1 ratio — width exactly twice the height. 6000×3000 is a sensible minimum for viewing on screens; larger masters such as 8000×4000 or more keep detail for zoomable tours, at the cost of longer Enblend renders and bigger files. If the field of view is slightly less than full — a common outcome when the nadir frames are missing — the canvas will not be a full sphere and 360 viewers will show it cropped or pinched; either add the missing frames or accept a partial panorama and export it as a wide cylindrical image instead of pretending it is a full 360.
Level the horizon
A tilted 360 is nauseating in a headset and sloppy on screen: the whole world leans. Use the drag controls in the Fast Preview to rotate the sphere until the true horizon sits exactly on the middle line of the preview and vertical features — door frames, building edges — stand vertical. If your set includes identifiable vertical lines, the Advanced interface lets the optimizer use vertical control points (lines marked as vertical) to force this precisely. Level before you render, because rotating a finished equirectangular in an ordinary editor wraps pixels across the seam and softens the image.
Spend the extra minute this deserves, because levelling errors are amplified by every 360 viewer: a two-degree tilt that looks harmless in the flat preview becomes a world that slides sideways as the viewer pans. A reliable trick is to find one strong vertical that should be perfectly upright — a door frame or building corner near the middle of a frame — rotate until it is vertical, then confirm with a second vertical on the opposite side of the sphere. If the two disagree, the set itself contains geometry problems (usually parallax or a mis-set lens type), and no rotation will satisfy both; fix the cause rather than averaging the error.
Handle the zenith and nadir
The zenith (sky) usually takes care of itself if you shot an up frame; a small hole in a clear sky can be blended invisibly. The nadir is the problem child, because your tripod stands there. Options, in order of quality: shoot a separate handheld nadir frame after moving the tripod, and let Hugin stitch it in — the full workflow is in our guide to nadir patching and tripod removal. Or mask the tripod out of the down shots in Hugin and accept a small blended patch. Or cover the spot with a mirror-ball or logo cap in post — acceptable for quick previews, less so for paid tours. Inspect the bottom of the sphere in a 360 viewer before delivering: equirectangular previews hide nadir flaws because the area is stretched across the whole bottom edge of the flat image.
Export for 360 viewers
Render a TIFF master from the Stitcher tab, then export a JPG copy for distribution. Viewers and platforms expect the 2:1 equirectangular JPG, ideally with the standard 360 metadata that identifies it as a spherical photo; if your viewer shows the file as a flat wide image, that metadata is what is missing, and dedicated 360 tools can inject it. Keep the TIFF: re-levelling, re-patching the nadir or re-exporting at another size — for example for the little planet treatment — should never start from the compressed JPG. For multi-row gigapixel-scale spheres, the memory advice in our gigapixel guide applies unchanged.
Publishing your 360
A finished equirectangular JPG is not yet a tour anyone can visit — it needs a viewer or a host. You have three practical routes. Social platforms (Facebook, YouTube for video) accept 360 images with the metadata discussed above, free and zero-friction, but with their compression and their rules. Dedicated hosting platforms are the professional route: CloudPano (affiliate link — we’re reader-supported; see our disclaimer) builds branded virtual tours with hotspots and floor plans and can publish to Google Street View (its Pro Plus plan was $33/month billed annually when we checked on 21 October 2026), while Kuula is the long-standing community favourite for straightforward tour hosting and embedding. And for your own website, a self-hosted viewer such as Pannellum costs nothing but a little setup. Whichever route you choose, publish from the quality JPG and keep the TIFF master archived — hosting platforms come and go, masters are forever.
FAQ
What size should a 360 panorama from Hugin be?
The canvas must be 2:1 — width exactly twice height. 6000×3000 is a workable minimum for screen viewing; 8000×4000 or larger is better for tours where visitors zoom in. The source photos’ resolution sets the practical ceiling.
Why does my 360 panorama have a visible seam where the edges join?
The left-right wrap seam shows when exposure differs across the set or the horizon is not level. Shoot with manual exposure and white balance, let the photometric optimization even out brightness, and level the horizon in the Fast Preview before rendering.
Can Hugin stitch photos from a dual-lens 360 camera?
Yes, if you export the two fisheye circles as separate images and declare the lens type as Circular fisheye. Alignment needs enough shared detail in the overlap band; texture-poor scenes (white ceilings, clear sky) are the hard cases for any stitcher.
Why is there a hole or smear at the top or bottom of my panorama?
Those are the zenith and nadir. A smear means the area was covered by only the extreme edge of a fisheye frame; a hole means it was never photographed. Shoot dedicated up and down frames — the stitcher cannot invent missing sphere.
